Firmware update: Nikon Z 6II 1.10

Nikon has for her Z 6II-digital system cameras released new firmware, with version number 1.10. These cameras have an fx-cmos image sensor with 24.5 megapixels on board and are suitable for lenses with a Nikon Z mount. The firmware can be installed from a Windows or macOS machine and is approximately 37MB in size. The list of changes for this update is as follows:

Changes from “C” Firmware Version 1.02 to 1.10

• Added 3840×2160; 60p and 3840×2160; 50p to the options available for Frame size/frame rate in the MOVIE SHOOTING MENU. More information is available in the portions of the “Reference Manual (complete instructions)” devoted to this feature.
  < CFexpress/XQD Memory Cards >
  A card with a maximum data transfer rate of 250 MB/s or faster is recommended for recording and playback of movies at a frame size of 3840 x 2160 (4K UHD) 60/50p.
  < SD Memory Cards >
  A UHS Speed ​​Class 3 or better card with a maximum data transfer rate of 250 MB/s or faster is recommended for recording and playback of movies at a frame size of 3840 x 2160 (4K UHD) 60/50p.
• Improved eye-detection performance in Auto-area AF (people) and Wide-area AF (L-people) AF-area modes.
• Support for RAW video output is available via a fee-for-service upgrade, * and firmware version 1.10 adds support under this service for Blackmagic Design external video recorders (currently the Video Assist 5” 12G HDR and Video Assist 7” 12G HDR). If you have already purchased the RAW video output upgrade for your camera, updating to firmware version 1.10 will add support for Blackmagic Design external video recorders automatically. Note, however, that RAW video output is not available at a resolution of 4K UHD 60p/50p.
• Users of Apple’s Final Cut Pro X (version 10.4.9 or later) can now display and adjust ISO sensitivity and color temperature for ProRes RAW footage output to ATOMOS NINJA V external recorders using the fee-for-service RAW video output upgrade. *
  < Choosing a RAW Output Type >
  Before filming RAW video, choose an option for HDMI > Advanced > RAW output options > RAW output type in the SETUP MENU based on the type of recorder connected: select Type A for NINJA V recorders and Type B for Video Assist recorders.
• Fixed an issue that sometimes prevented the camera downloading location data via SnapBridge when used with an MB-N11 power battery pack.

* The RAW video output upgrade is available on a fee-for-service basis. For more information, contact a Nikon-authorized service representative.