Software Update: Intel SSD Toolbox 3.5.14

Intel has released version 3.5.14 of its Solid State Drive Toolbox. With this program it is possible to manage an SSD from Intel. For example, it can provide information about the characteristics of the drive, some diagnostic tests can be run on the SSD and the performance can be optimized. In addition, it is possible to update the firmware. The following changes and improvements have been made in this release:

This tool version contains fix for the following issue:

  • Fix for system crash that may occur under certain conditions when running performance booster

For Intel Optane™ Solid State Drive 905P/900P Series

  • Fix for drive fails to set correct Native Max LBA when forcing max ddress capacity to smaller one
  • Fix for media errors + E2E error increments after coming back to the native capacity
  • Fix for drive sometimes fails PCIe training during reboots resulting in reduced link width or speed
  • Fix Link width degrades during link disable/enable on some platforms
  • Fix for Serial number is all zeroes after U.2 drive hotplug operation
  • Fix for Quality Reliability Test encountered Cold ECC Failure
  • Addresses CVE-2020-0584, CVE-2020-12309, CVE-2020-12310 and CVE-2020-12311

For Intel Solid State Drive Pro 7600p Series, 760p Series and E 6100p Series

  • Fixes SSD FW hang seen during D3 entry for Windows Modern Standby that may cause system timeout
  • Improves power during D3 state for Windows Modern Standby
  • Fixes SSD DRAM training error during FW boot that may cause system timeout during device low power resume
  • Fixes stability of SSD during system boot causing occasional system timeout
  • Addresses CVE-2020-0584, CVE-2020-12309, CVE-2020-12310 and CVE-2020-12311

For Intel Solid State Drive 660p Series

  • Fixes SSD FW hang seen during D3 entry for Windows Modern Standby that may cause system timeout
  • Improves power during D3 state for Windows Modern Standby
  • Fixes for drive NDA during heavy workload that may cause system timeout
  • Fixes for FW hang cause by host request for device wake up when device transitioning between low power states
  • Addresses CVE-2020-0584, CVE-2020-12309, CVE-2020-12310 and CVE-2020-12311

For Intel Solid State Drive Pro 5400s Series

  • Optimizations for NAND data refresh algorithms
  • Addresses CVE-2020-0584, CVE-2020-12309, CVE-2020-12310 and CVE-2020-12311

For Intel Solid State Drive 540s Series and E 5400s Series

  • Optimizations for NAND data refresh algorithms

For Intel Solid State Drive Pro 5450s Series, E 5100s Series and Pro 6000p Series

  • Addresses CVE-2020-0584, CVE-2020-12309, CVE-2020-12310 and CVE-2020-12311

Version number 3.5.14
Release status Final
Operating systems Windows 7, Windows Server 2008, Windows Server 2012, Windows 8, Windows 10, Windows Server 2016
Website Intel
Download https://downloadcenter.intel.com/download/29723/Intel-Solid-State-Drive-Toolbox?v=t
File size 82.86MB
License type Freeware
Comments
Loading...