Firmware update: Epox 4SDA(+)

Spice informed us that a new bios version for the Epox 4SDA(+) is out. The bios is already from the 26th last month, but only appeared on the site today. The changelog is as follows:

• According to Intel’s requirement “Processor Signature>= F13h” and “Brand ID = A0h” must show as “Intel Celeron (R)”
• Disable PCHEALTH_4EarlyShutdownSystem,
• PCHEALTH_4NoFanShutdownSystem if checksum fail.
• Update High Point 372 BIOS v2.32.
• Patch can’t detect Audio codes.
• Fixed some CPU use default ratio will not get correct CPU ratio.
• Fixed press “Insert” key will not load default value.
• Show PC3200 in POST when DRAM clock over 200MHz.