Download Firmware Draytek Vigor 2600 2.5.2

By admin On Feb 15, 2004

Spread the love

On Draytek’s FTP server, Anonymous: 80358 found a new firmware for the Vigor 2600, namely 2.5.2. The update can be taken down from here and has three improvements and eleven bug fixes. Please note that the current settings of the router are not taken over by the new version. The release notes mention the following changes:

Changes since firmware 2.5

Improvements

Improve ADSL auto-detection.

The router will set up pvc1 for PPPoE/PPPoA/MPoA when detected it

Improve telnet command “adsl ppp …” to support multi-pvc setting.

The router will set up pvc1 for internet access when got “adsl ppp 0 …”.
else, the router will enable that pvc only.

Correct ADSL interface values or MIB-II. Add ADSL-LINE-MIB ( RFC-2662 ).

Fixed problems

Deny reply for unicast ARP request

NAT failure on none directly connected subnet.

Fail to configure a static route for a host route.

Fail to configure the TCP/IP setting of LAN to LAN profile for the remote network.

prot. redirection function failure after a period of usage.

Fixed PPTP with CA pass through problem.

Fixed UDP fragment problem.

Fixed VPI changed problem when upgrade firmware from v2.3.6 or before.

Fixed broadcasting IP configuration on the WAN side.

Fixed Wan IP conflict in Online status page problem.

Fixed can’t edit host mask(255.255.255.255) in LAN-to-LAN profile problem.

Version number	2.5.2
Website	Draytek
Download	ftp://ftp.draytek.com.tw/VIGOR2600/RELEASE/2.5.2/FIRMWARE/ANNEXA_FOR_HOLLAND.zip
file size	2.68MB
License type	Freeware