Download Firmware Netgear WNDR3700v2 / WNDR37AVv2 1.0.0.10

Netgear has released new firmware for its WNDR3700v2 and WNDR37AVv2 routers. The wireless connections are of the 802.11n type and may be provided with WPA(2)-PSK or WPA(2) Enterprise security. In addition, there are five gigabit Ethernet ports, one of which is on the wan side and the other four can be used internally. The version number of this firmware release has been fixed to 1.0.0.10 and addresses an issue where the wireless connection was sometimes lost. The corresponding announcement looks like this:

WNDR3700v2/WNDR37AVv2 Firmware Version 1.0.0.10

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only. Also Please remember to do factory default after firmware upgrade if you upgrade this firmware from v1.0.0.6. Enter “Backup Settings” in the web GUI and click “Erase” button of “Revert to factory default settings”.

New Features & Bug Fixes:

• Fixed “Wireless disconnection issue”.

Known Issues:

• NTFS write performance (upload to WNDR3700 attached USB storage) is much slower than read no matter using samba or FTP. FTP read is 5 times faster than write. Samba (ie. access network drive via windows) read is 2 times faster than write.
• Sometimes clicking “Safely remove USB device” button can’t remove USB storage safely. Workaround: Make sure you are not accessing the attached USB device and the LED on USB device is not blinking (it means no one is accessing it). Then you need to remove the USB device directly and ignore the message about “remove USB device failure) from web GUI.
• Traffic meter – Traffic volume control is not accurate due to sampling rate. It may exceed the limit. Workaround: Set a proper number in “Mbytes before the monthly limit is reached” in the traffic control.