Fujifilm has for its X-T3-digital system cameras released new firmware, with 2.00 as version number. These cameras have an aps-c format 26.1 megapixel CMOS image sensor and are suitable for lenses with a Fujifilm X mount. This update is approximately 48MB in size and can be loaded onto the camera via a memory card set. The corresponding list of changes looks like this:
The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues:
- 4K HDR video recording in Hybrid Log Gamma (HLG)
Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards. It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation. - Simultaneous output of Film Simulation and F-Log footage
Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor. - Display color temperature (Kelvin) on EVF/LCD Color temperature (Kelvin) can be displayed on EVF/LCD.
- Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P.
- Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps. - Display power supply icon
Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD and Anker PowerCore Speed 20000 PD. - Fix or minor defects.
| Version number | 2.00 |
| Release status | Final |
| Website | Fujifilm |
| Download | |
| License type | Freeware |