Firmware Update: Asus P4B533 1007

jfeelders announced that a new BIOS is available for the Asus P4B533 board. The release mainly contains a number of bug fixes. Click here to start the download. Below are the release notes:

• Fix UPG603 DVD TV tuner PCI card has screen delay while real time recording under all Windows OS.
• Fix hardware monitor voltage reading is incorrect when Q-Fan control is enabled.
• Fix I-Panel hot keys fails.
• Fix the system cannot boot from BIOS boot block sometimes.
• Support Spanish, German and Italian.
• Fix the system hangs in POST(POST code:EC) sometimes.
• Fix CPU microcode update is not loaded successfully after the system resumes from Suspend-to-RAM(S3) state.
• Fix the system hangs in POST(POST code:63) sometimes if “Language” setup item is set to Traditional Chinese,
• Simplified Chinese or Japanese.
• Revise Q-Fan control algorithm to prevent fan speed slower than 1800 rpm.
• Fix Hardware Monitor raises a false “POWER Temperature” alarm if no thermal sensor for “POWER Temperature” is used and the setup item is enabled.
• Fix the system is shut down unexpectedly if “CPU Vcore” setup item is set to “1,800V”.
• Shorten the time needed for system resumption from Suspend-to-RAM(S3) state to working state under Windows 2000 or XP.
• Fix the system hangs in POST(POST code:ED) if a Micron PC3200U-344 DDR module (400MHz, CL3) is used.
• Patch all operating systems run slowly if a Via-S3 Z128AGP-DD01 AGP VGA card is used.
• Fix “Data Integrity Mode” setup item for ECC DDR modules is missing after loading setup default.
• Fix Q-fan control fails after the system resumes from Suspend-to-RAM(S3) state.
• Tune CPU Vcore voltage at early POST stage.
• Speed ​​up POST.
• Fix Windows 2000 cannot shutdown the system while “Power Up On PCI Card” is set to “Enabled” if a D-Link DFE-570TX PCI card or a DiSS Capture S800 PCI card is used.