Nikon has for its Z6– digital system cameras released new firmware, with version number 1.01. These cameras have an fx-cmos image sensor with 24.5 megapixels on board and are suitable for lenses with a Nikon Z mount. The firmware can be installed from a Windows or macOS machine and is approximately 28MB in size. The list of changes for this update is as follows:
Changes from “C” Firmware Version 1.00 to 1.01
- When On is selected for HDMI > Advanced > N-Log setting in the SETUP MENU, Maximum sensitivity now takes effect during movie recording if:
- the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or
- the camera is in mode M (manual) and On is selected for ISO sensitivity settings > Auto ISO control (mode M) in the MOVIE SHOOTING MENU.
- Fixed an issue that resulted in third-party software showing an incorrect value for the Exif 35 mm format equivalent focal length field for photographs taken with a non-CPU lens connected via an FTZ mount adapter with the focal length specified using the Non-CPU lens data item in the SETUP MENU.
- Fixed an issue that resulted in photographs taken using radio-controlled Advanced Wireless Lighting being overexposed if a face was detected with Auto-area AF selected for AF-area mode.
- Fixed an issue that resulted in an incorrect aperture being selected in mode P (programmed auto) with a flash mounted on the camera under conditions in which f/32 would normally be selected.
- Fixed an issue which prevented flash units controlled via radio Advanced Wireless Lighting syncing with shutter speeds of 1/100 s or faster with:
- On selected for Flicker reduction shooting in the PHOTO SHOOTING MENU and
- Enable selected for Custom Setting d5 (Electronic front-curtain shutter) in the CUSTOM SETTING MENU.
| Version number | 1.01 |
| Release status | Final |
| Operating systems | Windows 7, macOS, Windows 8, Windows 10 |
| Website | Nikon |
| Download | |
| License type | Freeware |