Download Firmware Draytek Vigor 2700/G/V/VG 2.7.1

Draytek has again prepared a new firmware for his Vigor 2700, Vigor 2700G, Vigor 2700V and Vigor 2700VG routers that are suitable for passing on ADSL2, ADSL2+ and VoIP connections. The version number has arrived at 2.7.1 and features the following list of changes since the previous entry in the muck tracker:

Version 2.7.1:

Improvements & Corrected Problems
• Improve the DSL interoperability when get OAM cell.

Version 2.7.0:

New Functions
• Add PPPoA/PPPoE Relay function.
• Improve DSL port based bridge service.
  support 1 port to map 1 pvc service.
  support 1 port to map 2 pvc service by “ServiceType” (Normal or IGMP).
• Support VLAN-Tag that the packet will be tagged while sending out by DSL and the tag on the incoming packet will be removed.
• Support DSL ATM QoS PCR/SCR/MSB.
• add “Outbound TCP ACK Prioritize” function for QoS.
• add telnet command “internet” & “nmask”.

Improvements & Corrected Problems

• Improve PPPoE/LLC performance.
• Correct the SNMP interface:ifPhysAddr incorrent issue for both LAN and ADSL interfaces.
• Correct ‘adsl ppp’ command issue that modulation (modu) can’t be set more than four.
• Improve wireless performance and coverage.
• Enlarged DHCP client protocol handler buffer size up to 576 bytes.
• Correct an issue that VCI does not answer ISDN call with 3.1K audio parameter issue.
• Roll back to IDLE status when accept PPTP socket fail to prevent from occupying a virtual interface forever.
• Correct a rebooting issue when set a wrong SIP account.
• Correct an issue that the wrong SIP Account show in digit Map page.

[break]The firmware is available in the following two flavors:
Draytek Vigor 2700/G/V/VG/Gi/VGi 2.7.1 – Annex A
Draytek Vigor 2700/G/V/VG/Gi/VGi 2.7.1 – Annex B