Download Firmware Ricoh GR Digital II 2.11

A few days ago, Ricoh released new firmware for its version number 2.11 GR Digital II-digital cameras released. The list of tweaks reports several minor bugs that are being buffed out and looks like this:

Version 2.11:

Modified the following phenomena:

• If you set the [Auto Aper. Shift] ON in the A mode, and you take a picture of a subject in high-intensity light, any key will not work.
• If a camera is configured in the following settings, and you go to the [CT] (Detail) setting in the white balance menu but you leave the selection screen without setting a value, and then if you take a picture and switch the MF with the Fn button, any key will not work.
  The settings:
  • Assigned [AF/MF] to the Fn button
  • [ADJ shutter] ON

Version 2.10:

Add the following features. The detailed information is available in a PDF document†

• [Correcting the White Balance in Shooting Mode] You can set the white balance correction manually in the shooting mode.
• [Correcting the White Balance in Playback Mode] You can compensate the white balance in a captured image manually.
• [WB Correct] for [ADJ Lever Set. 1/2/3/4] and [Function Button] You can register the [WB Correct] in an ADJ lever setting and the Fn button.
• [Detailed Information Display in Playback Mode] You can see the WB comp. value and the image setting value in the display.
• [Auto Aper. Shift] in Aperture Priority Mode. You can have the Auto Aperture shift feature in the A mode.
• [Reduction Image Noise] You can choose a noise reduction option depending on the ISO sensitivity.
• [ISO Sensitivity Display] The ISO sensitivity is displayed at your half-pressing the shutter release button, when you set [AUTO] or [AUTO-Hi] in the ISO sensitivity.

Modified the following phenomenon:

• with the [AutoRotate] is enabled (ON), if a playback image is rotated and make it enlarged, a histogram in the display may not appear properly.

Version 2.11:

Modified the following phenomena:

• If you set the [Auto Aper. Shift] ON in the A mode, and you take a picture of a subject in high-intensity light, any key will not work.
• If a camera is configured in the following settings, and you go to the [CT] (Detail) setting in the white balance menu but you leave the selection screen without setting a value, and then if you take a picture and switch the MF with the Fn button, any key will not work.
  The settings:
  • Assigned [AF/MF] to the Fn button
  • [ADJ shutter] ON

Version 2.10:

Add the following features. The detailed information is available in a PDF document†

• [Correcting the White Balance in Shooting Mode] You can set the white balance correction manually in the shooting mode.
• [Correcting the White Balance in Playback Mode] You can compensate the white balance in a captured image manually.
• [WB Correct] for [ADJ Lever Set. 1/2/3/4] and [Function Button] You can register the [WB Correct] in an ADJ lever setting and the Fn button.
• [Detailed Information Display in Playback Mode] You can see the WB comp. value and the image setting value in the display.
• [Auto Aper. Shift] in Aperture Priority Mode. You can have the Auto Aperture shift feature in the A mode.
• [Reduction Image Noise] You can choose a noise reduction option depending on the ISO sensitivity.
• [ISO Sensitivity Display] The ISO sensitivity is displayed at your half-pressing the shutter release button, when you set [AUTO] or [AUTO-Hi] in the ISO sensitivity.

Modified the following phenomenon:

• with the [AutoRotate] is enabled (ON), if a playback image is rotated and make it enlarged, a histogram in the display may not appear properly.

[break]