DrayTek has released new firmware for the Vigor 2920 series routers. These routers are suitable for passing ADSL2, ADSL2+, cable and VoIP connections. In the family include the Vigor 2920, Vigor 2920n and Vigor 2920Vn. The download is less than 5MB in size. The main change in this release is support for ipv6. The full changelog looks like this:
New Features
- Support IPv6.
- Support Smart Bandwidth Limit.
- Support DNS setting for each LAN subnet.
- Support LAN wired 802.1x.
- Support QoS retag.
Improvement
- Corrected: Static route doesn’t work when multi-subnet is enabled.
- Corrected: LAN1 will be displayed always while setting any static route for LAN2/3/4.
- Corrected: Routing table display error in Diagnostic>>Routing Table page.
- Corrected: Wrong LAN interface for static ARP is displayed.
- Corrected: Both computers with the same VLAN cannot communicate for each other when connecting to different switch.
- Corrected: IGMP snooping problem.
- Corrected: Can’t open the Switch P2260 web configurator via External Device.
- Corrected: The wireless client can’t access internal network from another AP and return to Vigor2920 wireless LAN.
- Corrected: DNS function does a force update even though no WAN IP changed.
- Corrected: DHCP Relay over VPN tunnel can’t work.
- Corrected: Remove the incorrect log of PPP start (XXX), for we don’t know who the incoming client is before authenticated by CHAP/PAP.
- Corrected: IP Phones behind Vigor2920 cannot get registration after WAN Failover (Router sent UDP packets with source port 0).
- Corrected: Cannot apply AES 192 and AES 256 on IPSec Security Method while the customer chooses options of AES without Authentication in VPN and Remote Access >> LAN to LAN page.
- Corrected: Firewall can’t block internal routing subnet packets.
- Corrected: UCF Syslog cannot show HTTP or HTTPS.
- Corrected: Can’t show the FTP file list when Android phone connecting to Vigor2920 FTP server.
- Corrected: ISDN Internet connection cannot work with miniVigor128.
- Improved: Remove Ultrasurf from WUI.
- Improved: Modify UCF/WCF block web page.
- Improved: Support IP Route subnet parameters setting for TR-069.
- Improved: Support firewall parameters setting for TR-069.
- Improved: Support RADIUS parameters setting for TR-069.
- Improved: Support Maintenance >> SysLog / Mail Alert Setup parameters setting for TR-069.
- Improved: Modify the default pool size of LAN DHCP server from 50 to 150.
- Improved: Online Status shows error Secondary DNS value.
- Improved: Improve VPN Profile WUI.
- Improved: Improve Samba with MacOS X.
- Improved: Modify the Telnet command of “ip arp accept ” to allow the ARP REPLY which Target’s MAC address does not equal to Ethernet source MAC address.
- Improved: Enhance VoIP QoS.
- Improved: Add new DDNS provider (UBDdns, Oray, and Peanut Shell).
- Improved: Support modems such as ZTE K3806, and MF192, and MF190J, QT-R220, LG VL600 LTE, LTE Yota LU150.
- Improved: Add a telnet command for VPN packets going through by NAT or not when VPN disconnects.
| Version number | 3.6.0 |
| Release status | Final |
| Website | Draytek |
| Download | |
| File size |
4.87MB |
| License type | Freeware |