Download Firmware D-Link DNS-323 1.08

D-Link has released new firmware for its DNS-323 storage systems and assigned it 1.08 as the version number. These NAS systems can accommodate two 3.5″ HDDs, which can be used in a jbod, raid-0 or raid-1 setup. The included list of changes for this release is as follows:

V1.08b01:

• Support Scandisk.
• Extends the Sender’s address limitation to 63 chars.
• Support System Logging/FTP Logging.
• Support Widget.
• FTP Server support Hebrew code page
• Support EXT3.
• User can assign shared folder or malfunction BT’s torrents.
• Email Alert: Send email when rebuild is done.
• Email Alert: Send email when detect the degrade mode.
• Capable of sending logs by email.
• Support Apkg : new applications can be modulized and be installed to disk.
• Add email notification when BT is done downloading.
• Save Quota setting to Configuration file.
• FTP Server supports FXP.
• “UPnP AV support wav streaming to XBox 360, PS3, DSM-520, DSM-510 and etc.”.
• Support Bonjour.
• FTP Server : unable to work by using other port than 21 no matter with or without SSL/TLS.
• Unable to send out an email with some authenticated mail server.
• “iTunes Server is capable of update more than 50,000 songs”.
• Display BT download status on Widget.
• BT can be uninstalled if it is installed via Apkg.
• Changes DST GUI design.
• Disk formatting counter imprecise and always hanged at 94% issue.
• Disk formatting error code returned capability.
• Ability to specify Passive port ranges for FTP.
• The ability to set the FTP server to ONLY accept SSL/TLS connections and reject regular non-authenticated connections.
• Ability to control the devices LED status of On or Off. Some users are complaining about the brightness of the BLUE LED when the device is placed in their home.
• Add the possibility to turn off the hard drive after more than 30 minutes (1 hour, 2 hours, etc.) in Power Management Settings.
• The ability to manually configure your SMTP mail server port. ISPs are no longer using port 25 and are now using unique ports. Also should be able to select authenticated for authenticated mail servers.
• Shut off fan at desired temp (ability to check always on low, Add always on ).
• Remove URL length limit (very often I can’t download things because URL is longer than 120 chars, or example I couldn’t download WinXP SP3 from Microsoft via DNS-323) : extends to 235 chars
• Ajax Download bar similar to BT Page(no refresh required).
• Support for: OGG, FLAC, MKV, APE, IFO, ISO, AAC, DIVX, M4A.
• UPnP AV needs to be able to handle spaces in file names.
• UPnP AV needs to be able to handle long file names.
• Ability to stream m2ts, .iso files.
• UPnP AV : If it runs across a Corrupt file then it just skip’s it instead of stopping the scan all together.
• More Indepth Network information on status page, (Current Rx/Tx, Day/Week/Month etc., Device Uptime).
• Support NFS Server.
• Support 2TB HDD.
• Samba Share mode and User mode auto switching to fix Vista login issue.
• Support Auto Power Recovery(For HW C1 only).
• Replace existing iTunes server (mt-daapd) with new released software, Firefly by Apkg.
• Incremental Backup setting gone while checking on Edit page.
• Display invalid quota value in Windows.
• When SMTP server set to Hinet, it failed to work when email account has dot.
• Email Alert counter delayed for 1mins.
• Invalid Username crashing web server.
• DDNS: Different providers support.(Add no-ip) (check with router guys, identical implementation).

V1.08b02:

• Bug Fix : Scan Disk Fails to scan –
• Bugfix : BT Settings page will not show when using firefox/chrome –
• Bugfix : UPNP AV Server is not serving Mp4 files – >
• Bugfix : Scheduled downloads re-occuring backup is not working –
• Bugfix : BT save location does not appear to work –
• Bugfix : Passive port range is not restricted to 5 digits or numbers below port cap –
• Bugfix : After setting the download schedule, the setting will gone if plugging-off the power cable directly.
• Update help file on GUI for the below items:
  • FTP Server->Passive Mode, SSL/TSL.
  • Time->Daylight Saving Dates(DST Start,DST End).
  • System->Power LED CONTROL.
  • POWER MANAGEMENT->FAN CONTROL.
• GUI has the ability to enable HTTPS (SSL) access only instead of allowing HTTP/S access by default.

v1.08b03

• Modify : All accounts checkbox sometimes does not show on UI –
• Bugfix : NAS becomes unresponsive when NFS is enabled for a few hours –
• Normal to Raid1 : create a new volume for the remaining disk space.

v1.08b04:

• Normal to Raid1 : revised RAID migration warning message because of we are able to create a new volume for the remaining disk space.
• PHYSICAL DISK INFO : show “L”–Left or “R”–Right instead of “1” or “2”.

v1.08b05:

• Normal to Raid1 : fixed some wrong becomings.
• Show wrong Raid mode info in GUI when migrate from an older f/w to v1.08.
• Removing the NFS server support due to instability.
• MD5SUM : 28efe47bf1af564b4f767e057c81660d ==> NAS202C_DLINKEu_DNS323.1.08b05(1.64.0804.2009)(BETA).zip

V1.08b06:

• Add NFS server support.
• “All accounts” remain exists when switching from “Share/Open” mode to “User/Account” mode.
• MD5 Checksum : dbfa4cf0dd6b185c72c15ca5b2d3438a ==> NAS202C_DLINKEu_DNS323.1.08b06(1.65.0827.2009)(BETA).zip

v1.08b07:

• Bugfix : Unable to save the modified word/excel file which already in device through Samba.
• Bugfix : Normal to Raid1 : create a new volume for the remaining disk space.
• MD5 Checksum : f9851fff727500d12d414ad5997e517c ==> NAS202C_DLINKEu_DNS323.1.08b07(1.66.1008.2009)(BETA).zip

v1.08b08:

• Fixed add-on security bug : blocking for unauthorized user to upload or remove any add-ons.

V1.08b09:

• Bugfix : when upgrading from a older f/w to the latest v1.08 f/w, the FAN run in high speed continually.